Click Rail System

A simple but affordable Hanging Rail System suitable for Home, Office or Gallery.

The Click Rail is the basic hanging rail system, it comes in 3 different colours, white, brushed alluminium and white primer allowing you to paint it any colour to match your walls.
We recomend using white End Caps and Corners for the white rail and grey End Caps and Corners for the brushed alluminium.
The system is very easy to install in a few simple steps.
1. Fix the wall brackets to the wall using one wall plug and screw per bracket. Six Wall Brackets are required per 2 metre length of rail.
2. Click the rail onto the wall brackets. This can be done by hand or by using a soft rubber mallet if required.
3. To join 2 lengths of Click Rail together simply overlap a bracket and click both rails on.
4. To go around a 90 degree corner use the Corner Connector, this can be used for either internal or external corners.
5. Finish off the rail with an end cap on each end.
6. Using the Twister Perlon (Hanging WIre) simply push up into the rail from underneath, twist and lock down. These can be positioned anywhere along the rail and any excess can be simply cut off using a pair of scissors.
7. Choose the required hook. These are ususally chosen on the basis of the weight of the pictures to be hung, however the ratchet hooks are the easiest to use due to there simple spring action lock system.
8. Finally, hang your pictures, sit back and relax.

To make it simpler we have made up kits which include everything you need for a 4 metre run. Extra hooks and wires can be added to the kits if required.

Order products: